£ GBP
€ EUR
$ USD
Tycon MPPT Smart Solar Charge Controller 7 Port PoE Switch - TPDIN-SC48-20 V2+
Tycon TPDIN-SC48-20-V2+
£575.99
Availability:
Despatched today
if ordered within the next 0 mins
Linitx Quick Code # 16971
Manufacturer SKU: TPDIN-SC48-20-V2+
EAN: 7703949951961
Manufacturer: Tycon Systems
| Quantity | 1+ | 10+ | 20+ | 50+ | 100+ | 250+ |
| Price | £479.99 EXC VAT | £475.19 EXC VAT | £470.39 EXC VAT | £463.19 EXC VAT | £455.99 EXC VAT | Call Us 01449 888000 |
||||Tycon TPDIN-SC48-20 V2+ MPPT Smart Solar Charge Controller
The TPDIN-SC48-20 v2+, newest in the TPDIN series of products, is a web manageable MPPT Solar Controller with a built-in 7 Port Gigabit Passive and active PoE switch. The controller uses temperature compensated smart battery charging to properly charge GEL, AGM or Lithium batteries keeping them at their best. It features a balance charge mode for periodic battery bank maintenance and can even charge batteries that are dead.
The TPDIN-SC48-20 v2+ features 4 x Gigabit 802.3at or 24/48V Passive PoE ports as well as 3 x Gigabit 24/48V Passive only PoE ports. Each port is capable of a maximum of 0.645A. There is a wire terminal auxiliary output capable of delivering 2.25A maximum. The total from all outputs is set to 150W at 48VDC and 72W at 24VDC for a max total of 222W. Outputs can be switched by the user between 802.3at (port 1-4 only), 48VDC, 24VDC pasive or OFF through the web interface.
TPDIN-SC48-20 v2+ offers a fully featured web interface offers the capabilities to measure and log battery voltage, battery current, input voltage/current, load current and battery temperature. Ports can be monitored and controlled by a settable ping watchdog to power cycle the port if communications to the unit are interrupted.
The Tycon MPPT Smart Solar Charge Controller's Auxiliary port can be controlled by voltage, temperature or time. It can be programmed to control lights, pumps, generators, heaters, fans and more. The unit supports automated Email alerts if user programmed limits are exceeded so that the user can be alerted in advance of developing problems on site.
The Tycon Systems MPPT Smart Solar Charge Controller can also be powered through an external AC to DC power supply connected to the PV+/PV- input in order to charge the batteries from an AC source such as grid power or a generator. All inputs and outputs are surge and overload protected. Connector and battery fuses are removable for easy maintenance. The TPDIN-SC48-20 v2+ can be mounted using the integral DIN rail mount bracket or using the 2 mounting tabs.
Features:
- TPDIN MPPT 48V 20A Solar Controller
- Temperature Compensated Smart Battery Charging
- 7 Port Gigabit PoE Switch
- Remote Monitor and Control
- 48V or 24V User Selectable Output Voltage
- 2.25A Auxiliary Wire Terminal Output
- Total 200W Power Output
- Automatic Low Voltage Battery Disconnect
- DIN Rail or Screw Tab Mounting
| TPDIN-SC48-20 V2+ Specifications | |
|---|---|
| Solar Input Voltage | 56VDC Min to 100VDC Max |
| Max Solar Panel Open Circuit Voltage (Voc) | 100VDC (Maximum worst case over full temperature range) |
| Max Solar Panel Power Point Voltage (Vmp) | 90VDC |
| Solar Input Current | 20A Maximum |
| Typical Controller Efficiency | 96% (68VDC Input, 10A Load, 25C) |
| MPPT Tracking Frequency | 19 times/sec or 19 Hz |
| Battery Voltage | 48VDC (Controller will function down to 20VDC) |
| Battery Current | 20A Maximum |
| Battery Type | GEL or AGM or WET or Lithium |
| Charging Volts at 25C | AGM= Float:55.2, Bulk:57.6V, Balance:58.4V (60 Min) GEL= Float:55.2, Bulk:56.8V, Balance:Disabled WET= Float:55.2, Bulk:58.4V, Balance:59.2V (60 Min) Lithium= Float:Disabled, Bulk:57.6V, Balance:Disabled |
| Temperature Compensation | -3mV/°C/2V |
| Fuse Type | 58V 20A Automotive Mini Blade Type (Littlefuse0997020.WXN) |
| Low Voltage Disconnect | 42V to 48V – settable in web interface |
| Low Voltage Disconnect Recovery | 44V to 54V – settable in web interface |
| Auxiliary DC Output Voltage | 24VDC or 48VDC – settable in web interface |
| Auxiliary DC Output Current | 2.25A Maximum Continuous, 3A Max peak |
| Auxiliary DC Output Controls | Temperature, Voltage, Time – settable in web interface |
| PoE Switch | Qty 7 RJ45, 10/100/1000MB Gigabit Ethernet, Layer 2, Auto Crossover |
| PoE Output Voltage | 802.3at (port 1-4 only), 48VDC or 24VDC or OFF – settable in web interface |
| PoE Output Power | 0.645A per PoE Port Max PoE Power supplied on pins 4,5 (V+) and 7,8 (V-) (Mode B) |
| Port Surge Protection | IEC 61000-4-2 (ESD) 15kV (air), 15kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 25A (8/20µs) |
| Maximum Power Output | 222W Total (150W @ 48VDC and 72W @ 24VDC) from all output ports (including Aux Output), Auto Shutdown and Autorecovery from Fail |
| Indicator LED’s | Charge (Green), 24VDC (Green) or 48VDC (Yellow) Port Voltage, Overload (Red) |
| Measurement Accuracy (V / I / T) | +/- 0.1V , +/- 0.1A , +/- 1 Deg C |
| Power Consumption | 3.5W Typ |
| Accessibility | Via Web Browser and SNMP |
| Data-Logger | FIFO, 15,000 data sets, Programmable log interval |
| Wire Size | Solar and Battery – 8AWG, Aux DC Output -12AWG |
| Mounting | DIN Rail or 4mm Screw Tab |
| Operating Temperature | -40C to +65C (-40F to 149F) |
| Humidity (RH) | 0% - 90% |
| Dimensions (LxWxDepth) | 151mm x 111mm x 138mm (5.9 x 4.4 x 5.4”) |
| Weight | 1.5kg (3.3lbs) |
| MTBF | >100,000 Hrs |
| Certifications | FCC/CE EN55022 (EMC) ; CE EN55024 (EMC); CE/UL EN60950-1 (LVD) |
Please note that links to other websites are beyond our control. We link in good faith and are not be responsible for their content.
TPDIN-SC48-20 V2 DATA SHEET
